Water supply drawings
The CTM Water Supply Code is developed to be consistent with the SEQ Water Supply & Sewerage Design & Construction Code Amendment to WSA-03 2011 V3.1. Relevant standard drawings are listed below, with a link to CTM drawings. SEQ drawings can be accessed via http://www.seqcode.com.au/seq-water-supply-code/. Note that the latest versions of SEQ drawings may not be approved by CTM, have annotations to the provisions, or may have been published after the CTM Code was published and are therefore yet to be approved (denoted with a *). The following tables provide guidance on the provisions of the SEQ drawings approved in the CTM Code.
CTM Drawings
SEQ Water Supply Code Drawings – CTM Acceptance List
SEQ General Legend Drawing
SEQ-GEN-1100-1-B Water Supply, Sewerage, Vacuum Sewerage & Pressure Sewerage Legend | APPROVED |
1100 to 1105 Series - Typical Design Plans & Main Arrangements
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1100-1 Typical Water Reticulation Locality Plan and Details - Sheet 1 | APPROVED |
SEQ-WAT-1100-2 Typical Water Reticulation Locality Plan and Details - Sheet 1 | NOT APPROVED |
SEQ-WAT-1101-2 Typical Water Reticulation Locality Plan and Details - Sheet 2 | APPROVED |
SEQ-WAT-1101-3 Typical Water Reticulation Design Plan Notes - Sheet 3 | APPROVED |
SEQ-WAT-1102-1 Typical Mains Construction Reticulation Main Arrangement | APPROVED |
SEQ-WAT-1103-1 Typical Mains Construction Distribution and Transfer Main Arrangements |
APPROVED Replace drawing Note 3 with “Service connections not allowed on DN300 and larger mains”. |
SEQ-WAT-1104-1 Typical DN63 PE Cul-De-Sac Arrangement | APPROVED |
SEQ-WAT-1104-2 Typical Scour Details for DN63 Mains | NOT APPROVED |
SEQ-WAT-1105-1 Typical PE Water Main Details | APPROVED |
SEQ-WAT-1105-2 Typical Connection to Existing Mains | APPROVED |
SEQ-WAT-1105-3 Typical Connection to Existing Steel Mains | NOT APPROVED* |
1106 to 1110 Series - Typical Property Service and Meter Details
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1106-1 Typical Property Service Connections Main to Meter | NOT APPROVED |
SEQ-WAT-1106-2 Typical Property Service Connections Main to Meter | NOT APPROVED |
SEQ-WAT-1107-1 Typical PE Property Services PE Main to Meter and Conduit Detail | NOT APPROVED |
SEQ-WAT-1107-2 Typical Copper Property Services PE Main to Meter and Conduit Detail | NOT APPROVED |
SEQ-WAT-1107-3 Typical Property Services General Arrangement 20mm or 25mm Meters | NOT APPROVED |
SEQ-WAT-1108-1 Property Services Potable Service Connection Conduit Details | APPROVED BUT WITH CTM WATER METER DETAIL |
SEQ-WAT-1108-2 Property Services Potable Service Connection Typical Main To Meter | |
SEQ-WAT-1108-3 Property Services Potable Service Connection 20MM Domestic Service Meter Box Details |
NOT APPROVED REPLACE WITH CTM WATER METER DRAWING |
SEQ-WAT-1109-1 Water Connections Single, Double And Ghost Above Ground Meter | NOT APPROVED |
SEQ-WAT-1109-2 Water Connections Subdivisional | NOT APPROVED |
SEQ-WAT-1110-1 Property services general arrangement and conduit details. | NOT APPROVED* |
SEQ-WAT-1110-2 Property services water meter and installation assembly details. | NOT APPROVED* |
1200 to 1210 Series - Typical Embedment, Trench and Thrust Restraint Details
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1200-1 Typical Soil Classification Guidelines And Allowable Bearing Pressures For Anchors & Thrust Blocks | APPROVED |
SEQ-WAT-1200-2 Embedment & Trench fill Typical Arrangement | APPROVED |
SEQ-WAT-1201-1 Standard Embedment Typical Flexible & Rigid Pipes | APPROVED |
SEQ-WAT-1202-1 Typical Special Embedment Inadequate Foundations Requiring Over Excavation & Replacement | APPROVED |
SEQ-WAT-1203-1 Typical Special Embedment Concrete & Stabilised Embedment and Flexible Joint Details | APPROVED |
SEQ-WAT-1204-1 Typical Trench And Bedding Details With In Existing Roads Type K To N | APPROVED |
SEQ-WAT-1205-1 Typical Thrust Block Details Mass Concrete | APPROVED |
SEQ-WAT-1206-1 Typical Thrust and Anchor Blocks for Valves | APPROVED |
SEQ-WAT-1207-1 Typical Thrust and Anchor Blocks for Vertical Bends | APPROVED |
SEQ-WAT-1208-1 Typical Restrained Joint System DN100 to DN 375 DI Mains | APPROVED |
SEQ-WAT-1209-1 Typical Trench Drainage Bulkheads and Trench stops | APPROVED |
SEQ-WAT-1210-1 Typical Trench Drainage Trench Systems | APPROVED |
1211 to 1214 Series - Typical Buried Crossings Details
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1211-1 Typical Buried Crossings Under Obstructions | APPROVED |
SEQ-WAT-1212-1 Typical Buried Crossings Major Road Ways | APPROVED |
SEQ-WAT-1213-1 Typical Buried Crossings Railways |
NOT APPROVED Refer to the rail authorities design criteria and Wayleave Approval for CTM areas |
SEQ-WAT-1214-1 Typical Buried Crossings Bored and Jacked Encasing Pipe Details | APPROVED |
1300 to 1306 Series - Typical Valve, Hydrant and Surface Fitting Installation Details
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1300-1 Typical Valve and Hydrant Identification Markers | APPROVED |
SEQ-WAT-1300-2 Typical Valve and Hydrant Identification Marker Posts | APPROVED |
SEQ-WAT-1301-1 Typical Valve and Hydrant Installation Valve Arrangement | APPROVED |
SEQ-WAT-1302-1 Typical Hydrant Installation | APPROVED |
SEQ-WAT-1303-1 Typical Valve and Hydrant Installation Future Extension | APPROVED |
SEQ-WAT-1303-2 Typical Valve and Hydrant Installation Future Extension Installation | NOT APPROVED |
SEQ-WAT-1304-1 Typical Air Valve Installation For Trunk Main | APPROVED |
SEQ-WAT-1305-1 Typical Surface Fitting Installation Valve And Hydrant Surface Boxes Trafficable And Non-Trafficable | APPROVED |
SEQ-WAT-1306-1 Typical Surface Fitting Installation Valve And Hydrant Surface Boxes Support And Surround Details | APPROVED |
1307 to 1310 Series - Scour, Large Valve Chamber, PRV and Flowmeter Details
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1307-2 PE Water Mains Typical Details Scours | NOT APPROVED |
SEQ-WAT-1307-3 Typical Appurtenance Installation Scour Arrangements |
APPROVED ALSO NEW CTM DRAWING FOR SCOUR TO OPEN STORMWATER DRAIN |
SEQ-WAT-1308-1 Typical Appurtenance Installation Large Valve Chambers | APPROVED |
SEQ-WAT-1308-2 Typical Appurtenance Installation Large Valve- Buried Installation | NOT APPROVED* |
SEQ-WAT-1309-1 Typical Appurtenance Installation Passive Pressure Reducing Valves (Prv) | APPROVED |
SEQ-WAT-1309-2 Typical Appurtenance Installation Active Pressure Reducing Valves (Prv) DN100 To DN300 | APPROVED |
SEQ-WAT-1309-3 Typical Appurtenance Installation Active Pressure Reducing Valves (Prv) DN100 And DN150 | APPROVED |
SEQ-WAT-1309-4 Typical Appurtenance Installation Active Pressure Reducing Valves (Prv) DN200 To DN300 | APPROVED |
SEQ-WAT-1310-1 Typical Appurtenance Installation Active Pressure Reducing Valves (Prv) Above Ground |
APPROVED ONLY WHERE BELOW GROUND PRVS ARE NOT PARTIAL |
SEQ-WAT-1310-2 Typical Appurtenance Installation Active Pressure Reducing Valves (Prv) Above Ground |
APPROVED ONLY WHERE BELOW GROUND PRVS ARE NOT PARTIAL |
SEQ-WAT-1310-3 Typical Appurtenance Installation Active Pressure Reducing Valves (Prv) Above Ground Cabinet Details |
APPROVED ONLY WHERE BELOW GROUND PRVS ARE NOT PARTIAL |
SEQ-WAT-1310-4 Typical Appurtenance Installation Flowmeter details Below ground installation | NOT APPROVED* |
1311 to 1318 Series - Aerial Crossings, Small Water Supply PS or Reservoir and Main
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1311-1 Aerial Crossings Typical Aqueduct | NOT APPROVED* |
SEQ-WAT-1311-2 Typical Aerial Crossings Aqueduct protection grille | NOT APPROVED* |
SEQ-WAT-1312-1 Aerial Crossings Typical Bridge Crossing Concepts | APPROVED |
SEQ-WAT-1313-1 Flanged Joints Typical Bolting Details | APPROVED |
SEQ-WAT-1314-1 Typical Small Water Supply Pump Station Or Reservoir Drawing 1 Of 4 | NOT APPROVED |
SEQ-WAT-1315-1 Typical Small Water Supply Pump Station Or Reservoir Drawing 2 Of 4 | NOT APPROVED |
SEQ-WAT-1316-1 Typical Small Water Supply Pump Station Or Reservoir Drawing 3 Of 4 | NOT APPROVED |
SEQ-WAT-1317-1 Typical Small Water Supply Pump Station Or Reservoir Drawing 4 Of 4 | NOT APPROVED |
SEQ-WAT-1318-1 Typical Arrangement Main Swabbing Chamber | NOT APPROVED |
1319 Series - Fall Prevention Covers and Grates
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1319-1 Fall prevention covers and grates At water pumping stations Drawing index, notes and legend. | NOT APPROVED* |
SEQ-WAT-1319-2 Fall prevention covers and grates At water pumping stations General arrangement and opening/closing sequence | NOT APPROVED* |
SEQ-WAT-1319-3 Fall prevention covers and grates At water pumping stations Cross sections and details sheet 1 of 2 | NOT APPROVED* |
SEQ-WAT-1319-4 Fall prevention covers and grates At water pumping stations Cross sections and details sheet 2 of 2 | NOT APPROVED* |
1400 to 1410 Series - Steel Pipe Jointing & Fabrication, Valve Bypass and Corrosion
SEQ Drawing Reference | MACKAY |
---|---|
SEQ-WAT-1400-1 Typical Steel Pipe Jointing Butt Welding Of Joints | APPROVED |
SEQ-WAT-1401-1 Typical Steel Pipe Jointing Rubber Ring Joint Spigot Band Specials | APPROVED |
SEQ-WAT-1402-1 Typical Steel Pipe Jointing Welded Pipe Collars | APPROVED |
SEQ-WAT-1403-1 Typical Steel Pipe Jointing Bends | APPROVED |
SEQ-WAT-1404-1 Typical Steel Fabrication Access Opening For Pipes > DN 750 | APPROVED |
SEQ-WAT-1405-1 Typical Steel Fabrication Dismantling And Flexible Joints | APPROVED |
SEQ-WAT-1406-1 Typical Steel Fabrication Valve Connection And Bypass | APPROVED |
SEQ-WAT-1407-1 DI Installation Valve Bypass Arrangement Typical Di Pipe Fittings | APPROVED |
SEQ-WAT-1408-1 Typical Joint Corrosion Protection Cement Mortar Lined Steel Pipe DN 750 To DN 1200 | APPROVED |
SEQ-WAT-1409-1 Hydrant Installation Fittings Typical PE Assemblies Nomenclature | APPROVED |
SEQ-WAT-1410-1 Typical Chlorination Test Point Details | APPROVED |
NDW-INDEX NON-DRINKING WATER DRAWINGINDEX | NDW DRAWINGS NOT PART OF CTM CODE |