Sewerage Pump Station Drawings
The CTM Sewerage Pumping Station Code is developed to be consistent with the – SEQ Water Supply & Sewerage Design & Construction Code Amendment to WSA-04 2005 V2.1. Relevant standard drawings are listed below, with a link to CTM drawings. SEQ drawings can be accessed via https://www.seqcode.com.au/seq-sewerage-pumping-station-code. Note that the latest versions of SEQ drawings may not be approved by CTM, have annotations to the provisions, or may have been published after the CTM Code was published and are therefore yet to be approved (denoted with a *). The following tables provide guidance on the provisions of the SEQ drawings approved in the CTM Code.
SEQ Sewerage Pumping Station Code Drawings – CTM Acceptance List
SEQ General Legend Drawing
| SEQ Drawings Reference |
MACKY |
| SEQ-GEN-1100-1-B Water Supply, Sewerage, Vacuum Sewerage & Pressure Sewerage Legend |
APPROVED |
1100 to 1102 Series - Typical Plan, Layout, Section, P&ID
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1100-1 Typical Locality And Site Plan |
NOT APPROVED REFER NEW CTM DRAWINGS 001 AND 002 |
| SEQ-SPS-1100-2 Typical Longitudinal Section Of Rising Main |
APPROVED |
| SEQ-SPS-1101-1 Typical P & Id Diagram Duty-Assist Operation |
APPROVED |
| SEQ-SPS-1101-2 Typical P & Id Diagram Duty Standby Operation |
APPROVED |
| SEQ-SPS-1101-3 Pump And Rising Main Details |
APPROVED |
| SEQ-SPS-1101-4 Rising Main Concept Design Sections And Mean Head Calculations |
APPROVED |
| SEQ-SPS-1102-1 Typical Site Layout |
NOT APPROVED REFER NEW CTM DRAWINGS 001 AND 002 |
| SEQ-SPS-1102-2 Typical Site Layout With Storage And Back-Up Power |
NOT APPROVED REFER NEW CTM DRAWINGS 001 AND 002 |
| SEQ-SPS-1102-3 Alternative site Layout With Storage And Optional Flow-Meter |
NOT APPROVED |
| SEQ-SPS-1102-4 Typical Site Layout With Pig Insertion Emergency Pump Point And Grit Collector |
NOT APPROVED |
| SEQ-SPS-1102-5 Level And Capacities Interaction Diagram |
NOT APPROVED |
| SEQ-SPS-1102-6 Alternative Level Interaction Diagram For Small Stations |
NOT APPROVED |
1300 to 1301 Series - Typical Wet Well Arrangement, Lift Station and Section Details
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1300-1 Typical 2.4m Wet Well General Arrangement |
APPROVED
(WET WEL WASHERS AND LADDERS NOT REQUIRED. FLOWMETERS ARE REQUIRED BY MRC) |
| SEQ-SPS-1300-2 2.4m Wet Well Section Details |
APPROVED
(WET WELL WASHERS AND LADDERS NOT REQUIRED. FLOWMETERS ARE REQUIRED BY MRC) |
| SEQ-SPS-1300-3 2.4m Wet Well Pipework Arrangement |
APPROVED
(WET WELL WASHERS AND LADDERS NOT REQUIRED. FLOWMETERS ARE REQUIRED BY MRC) |
| SEQ-SPS-1300-4 Flow Meter & Section Valve Chamber |
APPROVED
(WET WELL WASHERS AND LADDERS NOT REQUIRED. FLOWMETERS ARE REQUIRED BY MRC) |
| SEQ-SPS-1300-5 2.4M Wet well Structural Details |
NOT APPROVED |
| SEQ-SPS-1300-6 Level Control And Well Washer Details |
LEVEL CONTROL DETAILS ACCEPTED.
WET WELL WASHERS DETAIL NOT USED. |
| SEQ-SPS-1300-7 2.4M Wet well `Notes Sheet 1 Of 2` |
APPROVED |
| SEQ-SPS-1300-8 2.4M Wet well Notes Sheet 2 Of 2 |
APPROVED |
| SEQ-SPS-1300-9 Typical 1800 Dia lift Station |
NOT APPROVED |
| SEQ-SPS-1300-10 Typical 1800 Dia lift Station Sections |
NOT APPROVED |
| SEQ-SPS-1300-11 Typical 1800 Dia lift Station Miscellaneous Details |
NOT APPROVED |
| SEQ-SPS-1300-12 Alternative Lift station Arrangement Including Storage Option |
NOT APPROVED |
| SEQ-SPS-1301-1 Pump well General Arrangement Plan At Top Slab Level |
NOT APPROVED |
| SEQ-SPS-1301-2 Pump well General Arrangement Plan At Header Pipe Level |
NOT APPROVED |
| SEQ-SPS-1301-3 Pump well General Arrangement Sectional Elevation |
NOT APPROVED |
| SEQ-SPS-1301-4 Chain Suspended Submersible Pump Typical Installation |
APPROVED |
1304-0 to 1304-29 - Access Cover Options 1, 2 & 3
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1304-0 Aluminium Access Covers Drawing Index & General Notes |
APPROVED |
| SEQ-SPS-1304-1 Aluminium Access Covers General Arrangement |
APPROVED |
| SEQ-SPS-1304-2 Typical Multi Cover Arrangement & Section Details |
APPROVED |
| SEQ-SPS-1304-3 Aluminium Access Covers Section & Hinge Details |
APPROVED |
| SEQ-SPS-1304-4 Aluminium Access Covers Cover Section Details |
APPROVED |
| SEQ-SPS-1304-5 Aluminium Access Covers Lock Box Mechanism Detail |
APPROVED |
| SEQ-SPS-1304-6 Aluminium Access Covers Grille Hinge Details & Sections |
APPROVED |
| SEQ-SPS-1304-7 Aluminium Access Covers Centre Grille Hinge Details & Sections |
APPROVED |
| SEQ-SPS-1304-8 Aluminium Access Covers Miscellaneous Details |
APPROVED |
| SEQ-SPS-1304-9 Aluminium Access Covers Retaining Post Details |
APPROVED |
| SEQ-SPS-1304-10 Sewage Pump Station Light Duty Access Covers |
NOT APPROVED |
| SEQ-SPS-1304-11 Lifting Duty Access Covers Frame, Safety Mesh Panels And Cover |
NOT APPROVED |
| SEQ-SPS-1304-12 Lifting Duty Access Covers Pump Well Hinge And Seal Details |
NOT APPROVED |
| SEQ-SPS-1304-13 Lifting Duty Access Covers Pump Well And Valve Pit Latch Mechanism |
NOT APPROVED |
| SEQ-SPS-1304-14 Lifting Duty Access Covers Latch Mechanism Box Details |
NOT APPROVED |
| SEQ-SPS-1304-15 Lifting Duty Access Covers Striker Plate On Frames Details |
NOT APPROVED |
| SEQ-SPS-1304-16 Lifting Duty Access Covers Valve Pit General Arrangement |
NOT APPROVED |
| SEQ-SPS-1304-17 Lifting Duty Access Covers Sections And Details |
NOT APPROVED |
| SEQ-SPS-1304-18 Aluminium Access Covers-Option 3 Drawing Index, Notes and Legend Sheet 1 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-19 Aluminium Access Covers-Option 3 Wet-Well Access Covers Opening Options Sheet 2 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-20 Aluminium Access Covers-Option 3 Valve Chamber Access Covers Opening Options Sheet 3 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-21 Aluminium Access Covers-Option 3 Wet-well Handrails Arrangement options sheet 4 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-22 Aluminium Access Covers-Option 3 Wet-well access covers with Handrails general arrangement plans sheet 5 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-23 Aluminium Access Covers-Option 3 Wet-well access covers with Handrails details sheet 6 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-24 Aluminium Access Cover-Option 3 Wet-well access covers supported by safety grate details sheet 7 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-25 Aluminium Access Covers-Option 3 valve chamber access covers general arrangement plans sheet 8 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-26 Aluminium Access Covers-Option 3 valve chamber access covers and safety grate details sheet 9 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-27 Aluminium Access Covers-Option 3 Handrails and Toeboards details sheet 10 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-28 Aluminium Access Covers-Option 3 Miscellaneous details 1 of 2 sheet 11 of 12 |
NOT APPROVED* |
| SEQ-SPS-1304-29 Aluminium Access Covers-Option 3 Miscellaneous details 2 of 2 sheet 12 of 12 |
NOT APPROVED* |
1305 to 1308 Series - Ladders, Handails & Water Supply
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1305-1 Aluminium Ladders `` |
NOT APPROVED |
| SEQ-SPS-1305-2 Aluminium Extendable Hand Grip Stanchion |
NOT APPROVED |
| SEQ-SPS-1305-3 Aluminium Handrails |
APPROVED |
| SEQ-SPS-1305-4 Fabricated Metal Work |
APPROVED
(NOTE LADDERS AND STEP IRONS NOT ACCEPTED ON SPS) |
| SEQ-SPS-1308-1 RPZ Device Typical Layout |
NOT APPROVED |
1400 To 1407 Series - Grit Collector, Storage Chamber, Vent Pole, Discharge MH & PE Lining
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1400-1 Grit Collector Maintenance Hole General Arrangement |
NOT APPROVED |
| SEQ-SPS-1401-1 Grit Collector-Maintenance Hole Bar Screen Installation General Arrangement |
NOT APPROVED |
| SEQ-SPS-1401-2 Grit Collector-Maintenance Hole Inlet Pipe & Valve Installation & Details |
NOT APPROVED |
| SEQ-SPS-1402-1 Additional Storage Chamber General Requirements |
NOT APPROVED |
| SEQ-SPS-1405-2 Typical Vent Pole |
APPROVED |
| SEQ-SPS-1406-1 Rising Main Discharge to Gravity Sewer |
APPROVED
(NOTE COATED LINING MAY BE ACCEPTABLE ALTERNATIVE TO PE) |
| SEQ-SPS-1406-2 Preferred Rising Main Discharge Manhole To Gravity Sewer - 900Mm Dia |
NOT APPROVED |
| SEQ-SPS-1406-3 Alternative Rising Main Discharge Manhole To Gravity Sewer - 900Mm Dia |
NOT APPROVED |
| SEQ-SPS-1406-4 Rising Main Discharge Manhole To Gravity Sewer - 1200Mm Dia |
NOT APPROVED |
| SEQ-SPS-1407-1 Polyethylene Lining Top Slab & Wall Typical Details |
NOT APPROVED |
| SEQ-SPS-1407-2 Polyethylene Lining Wall Pipe Penetration Typical Details |
NOT APPROVED |
1508 To 1509 Series - Survey & Label Plate, Valve Spindle, Valve Marking and Gearbox
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1508-1 Survey Plate, Pump Label Plate Valve Spindle Access |
APPROVED |
| SEQ-SPS-1508-2 Rising Main Valve Marking |
APPROVED |
| SEQ-SPS-1509-1 Grit Collector Maintenance Hole Above Ground Gear Box |
NOT APPROVED |
1601 To 1608 Series - Trench Fill, Scour, Air Valve, Valve Cover and Emergency Pump Connection
| SEQ Drawing Reference |
MACKAY |
| SEQ-SPS-1601-1 Typical Pipe Installation, Support And Trench fill-Rising Mains<=Dn300 |
APPROVED |
| SEQ-SPS-1602-1 Rising Main Scour Drain Arrangement |
APPROVED |
| SEQ-SPS-1603-1 Scour Maintenance Hole For Rising Mains Dn300 Or Smaller |
NOT APPROVED |
| SEQ-SPS-1604-1 Scour Maintenance Hole For Rising Mains Larger Than Dn300 |
NOT APPROVED |
| SEQ-SPS-1605-1 DN32 Air Bleed Assembly For OD250 Rising Mains Or Smaller |
NOT APPROVED |
| SEQ-SPS-1606-1 Automatic Gas Release Valves |
NOT APPROVED |
| SEQ-SPS-1607-1 Cast Iron Valve Box And Cover |
NOT APPROVED |
| SEQ-SPS-1608-1 Combination Emergency Pump Connection And Pig Insertion Point Details |
NOT APPROVED |
| SEQ-Electrical- Drawings |
REFER INDIVIDUAL WATER SERVICE PROVIDERS FOR ELECTRICAL DRAWINGS |
Additional Drawings
A3-00853 D - Sewage Pump Station Overflow(PDF, 194KB)
A3-04164 C - Pump to Pressure Main Connection, Wall Pipe Bracket Details(PDF, 149KB)
A3-04165 D - Pump to Pressure Main Connection, Hose Connection Bend(PDF, 93KB)
A3-04166 C - Pump to Pressure Main Connection, Hose Connection Bend Quick Coupling Details(PDF, 154KB)
A3-06025 B - Water Supply Arrangement(PDF, 199KB)
Superseded drawings
A3-00852 D - Rising Main Discharge Details and Vent Details(PDF, 183KB)
A3-04154 D - Mobile Pump Connection Arrangement(PDF, 153KB)
A3-04162 C - Pump to Pressure Main Connection, Hose Connection Bend Assemblies(PDF, 177KB)
A3-04163 C - Pump to Pressure Main Connection, Wall Pipe Bracket Assemblies(PDF, 160KB)
A3-04170 C - Miscellaneous Details Survey Plate, Pump Label Plate, Valve Spindel Access(PDF, 137KB)
A3-04172 D - Pipe Installation, Support and Trench Fill Pressure Mains Less Than or Equal to DN 300(PDF, 152KB)
A3-04173 D - Scour Arrangement Pump and Gravity(PDF, 134KB)
A3-04304 D - Flanged Joints, Bolting Details(PDF, 162KB)
A3-04320 A - Flow Meter Arrangement(PDF, 183KB)
A3-06026 A - Typical Site Layout(PDF, 225KB)
A3-06027 A - Typical 2.4m Wet Well General Arrangement(PDF, 189KB)
A3-06028 A - Typical 2.4m Wet Well - Section, For Wells Greater Than 7m in Depth & or Greater than 10kW(PDF, 268KB)
A3-06029 A - Typical 2.4m Wet Well - Section, For Wells Less Than 7m in Depth & or Greater than 10kW(PDF, 260KB)
A3-06976 A - Manual Operated Air Valve Pit, DN50 and DN80 Air Valves(PDF, 177KB)